Skip to main content

Author: Kirsten Haglof

Adventures in Opportunity Canvasing, Part 3 of 3

The big day had finally arrived! Thanks to my earlier preparation (see parts two and three), I set up in record time and could sit and worry before everyone got there.

Apart from having the canvas up on the wall, I also decided to print off my template. I placed a few templates on each table so participants could get a closer look and read the prompt questions themselves. I also put pens, sheets of paper, and sticky notes on each table in the event people thought of something to contribute and wanted to write it down before forgetting. Alternately, if we decided to have them fill out the sticky notes and place them on the board themselves, they would need these materials. I wanted to make sure I was ready for a few variations to the meeting as I find once you are in a group you realize you have to change your approach. For instance, if no one was participating out loud, I could ask them to fill out some sticky notes on their own and then place them on the canvas as they talked about them.

To start things off, I had my key stakeholder give an introduction of the opportunity at hand and some background on why we wanted to explore it. Since he was from the business area the others operated in, I felt that he could tell a better story. Once he finished with his introduction, I then presented the Opportunity Canvas as well as some housekeeping rules such as not using laptops, when we will take breaks, and the Jellyfish rule. No one had questions about the approach so, we were off!

Here we go!

I was fortunate to have an active group of people who were willing to talk and share their ideas. I was able to write out sticky notes as they talked and placed them on the canvas. Some areas did require a little prodding, such as users and customers. I got them started with some example users and customers that I had generated during my dry run. From there, they were able to introduce other customers I had not considered, and we found a couple of segments with different problems.

Overall, we came away with many ideas for how to solve customers’ problems. We even had time to do a small exercise to order them in a way that we thought would provide the most value initially (those are the arrows in the Solution Ideas section). We also identified a customer segment that would be good to experiment with. Here is what our board looked like after:

haglof 021317

Would I do it again? What would I do differently?

I would use the Opportunity Canvas again. This technique, in particular, was a good way to focus a discussion, establish a flow, and make sure to hit the important points. There are still a few things I would do differently:

  1. Narrow the scope of the opportunity and present that scope at the beginning of the meeting. I knew this opportunity was large to start with, and I should have picked the part of it to focus on. I found people straying to other topics that were closely related, but not in scope.
  2. Tie the solutions you have today with the problems to help identify additional problems for your users or customers. For instance, if one solution today is calling the company, and you have limited call hours, a problem for customers is finding time during their work day to contact you.
  3. When completing your user and business metrics sections, try your best to put them in the form of a hypothesis. This makes it easier to setup measurable goals in the future when you start to gather data. In fact, having people set up the hypotheses with specific time frames and measurements is even better. Teresa Torres has a good, measurable hypothesis format, you can find it here.
  4. Gather any initial data, statistics, or research you can prior to performing the Opportunity Canvas discussion. There were a few times participants asked about specifics like “How many customers do this?” or “How long does this process take?” I believe having answers could have resulted in identifying more problems or solutions.

More broadly, I have convinced myself to practice new techniques or methods more often, even if it means barricading myself in a small conference room. I read a lot of articles and books every week about lean methods, requirements gathering practices, how to build a roadmap, etc. For everything I read, I lose about half of the knowledge, because I do not try it right away. This was the first time I was able to try something, with a large group, shortly after reading it. Practicing it helped cement the learning.

Adventures in Opportunity Canvasing, Part 2 of 3

I had convinced my key stakeholder that doing an Opportunity Canvas would be a good way to get started on this new large initiative and was trying to figure out how to pull it off.

Click here to read the first part of this series. This discussion had a lot riding on it, both for this project and future dealings with stakeholders and large initiatives:

  1. Having this discussion would help us find our best and most impactful opportunity.
  2. Making sure I add value to users is the reason I do this job, so users are always the reason for doing anything.
  3. I had been pushing for more collaboration between the teams implementing the solution and the business area. To date, we would just be given a solution to build, that was mandated by someone on the business side, and we would not have much say in execution. This conversation would keep us focused on the problems and opportunities so we could then solve them without a prescription.
  4. This was brand new functionality that we could run experiments with instead of implementing something no one wanted or would use. This discussion would help identify risks and how to run those experiments.
  5. Selfishly, this was my first introduction to some stakeholders that I had not yet met, and if I pulled this off, I could come out looking good.

Practice Makes Perfect

With all this at stake, I decided to do a dry run myself. This was new for me. I am a fly by the seat of your pants, figure it out as you go, fake it till you make it type of person. I had tried things like this at previous jobs, without trying them myself first, and they were a struggle. Although people were always willing to try something new, I was not willing to spend time understanding the technique enough to guide them through the first round. I also had a silly notion in my head that if I tried it myself, I would find all the answers, and then the meeting would not feel necessary anymore. I know, I know, bring on the criticism. Reading that now, it is so embarrassing that I had entertained that thought. This time I would do it differently, and I would try it myself first.

I barricaded myself in a little conference room that had a whiteboard with every different color sticky note and marker I could find. I started by drawing out the areas of the canvas and had my first realization – I cannot draw straight lines on a white board, and it takes a while to set the canvas up.

Tip 1: Bring as much pre-assembled, pre-drawn, pre-filled-out materials as you can.

In this case, I decided to fill out the large sticky note paper with the different sections, so I could just reassemble them in the room when I got there. Next, was to start going through each section and using some of the prompt questions from the book to fill them out. Even with the prompt questions, I still had a hard time understanding what should be placed in some of the sections.

Tip 2: Make sure you understand what you are asking your participants to provide or do.

I went back to the Internet to find an example online that would be easy for anyone to understand. Unfortunately I couldn’t find any filled out examples, so I tried to think of easy problems that had already been solved such as adding shopping carts at the grocery store or being able to “like” things on Facebook. If I was asking these questions my first time through you’d better believe others would have the same questions. Had I gone into that meeting with no preparation, I wouldn’t have been able to guide them. Any momentum we had picked up during the conversation would have stalled. By thinking of simpler examples ahead of time, I could relay those stories and help people understand each section.

Now that I had tried a few simpler canvases, I started writing on the whiteboard for my opportunity, only to be repeatedly erasing them and re-writing them elsewhere. I found some should have been in a different section after re-reading it. Occasionally I wanted to create sub-groups within the section to expose a pattern or segment.

Tip 3: Use sticky notes when posting on whiteboards, they are easy to move as the discussion evolves.

After I had finished going through each section, I noticed that I did not like the organization of the Opportunity Canvas as presented by Jeff. As I was talking out loud, reviewing the canvas, I identified a flow that worked better for me. I added a new section for questions and assumptions. I realized much of what I was basing the other sections on were assumptions that should be verified. I also made other sections smaller, because we would not have the right people in the room. The result is this modified template that you can use, and adjust for your needs.

Tip 4: Don’t be afraid to modify methods or practices you get from others to fit your needs.

It is about applying a technique or principle not following it to the letter.

Overall, I was feeling much more confident heading into the meeting. I could facilitate a meaningful discussion, identify what our assumptions were, and we could start experimenting.

Adventures in Opportunity Canvasing, Part 1 of 3

I recently finished reading Jeff Patton’s “Mapping User Stories” book.

Jeff’s book is great and gave me many tips on how to improve my story telling but he also introduced me to the Opportunity Canvas, an adaptation of Marty Cagan’s Opportunity Assessment. I had seen models like this before but never thought to use them with stakeholders to determine what opportunities we had in front of us. I thought they were only good for new products not yet in the market, instead of more mature products exploring a new feature set. I read this section of the book just in time because I was embarking on a new, large initiative. I wanted to get my key stakeholder onboard for fully discovering the opportunity and how best we could tackle it, so this seemed like a perfect time to practice my new-found knowledge.

What is an Opportunity Canvas?

For those not familiar with Opportunity Assessments or Canvases, I’ll provide a brief run-down based on what Jeff writes. They both start with a way of organizing all the areas you should discuss regarding an opportunity so that you can see every part at once and connect the dots easily. Here is an image from “Mapping User Stories” (page 170 or visit his website) showing the layout.

haglof 012517

  1. Problems or Solutions – Identify potential problems or pain points you know your customers have and list out solution ideas you have already thought about or heard suggested. Jeff mentions you often hear about a feature or idea first, so if you are starting with a solution think about the problems that solution addresses.
  2. Users and Customers – Identify whom your users and customers. These could be two different audiences for your company. Hopefully, you are already using personas making this part easy.
  3. Solutions Today – List out how your users and customers are solving these problems today. Is there a workaround in the software or product that eventually solves it? Can they solve this problem via a different, perhaps less convenient, channel today?
  4. User Value – What will your users and customers get from having this solution or problem solved? Think beyond just “it will be easier to do” to the additional time they will have to build their relationships with their clients if this task was quicker.
  5. User Metrics – If you implement this solution what could you track to ensure this is delivering value? It is a good idea to think about this two ways – how you will know what you implemented is making a difference, and you should iterate further. As well as how you will know this is not helping customers, and maybe it should be cut.
  6. Adoption Strategy – Think through releasing this new solution and how you will let customers and users know it is available. This could also include possible training videos or materials needed to take advantage of the new solution too.
  7. Business Problem – You have talked a lot about your users’ and customers’ problems already, but what about your own business? What problems could this help solve internally? Could it reduce the number of support calls? Could it reduce call times because representatives do not have to talk through the workaround?
  8. Business Metrics – For those business problems you identified, how can you prove this solution is helping to solve them? Remember, identify metrics in both directions – what success looks like and what failure looks like.
  9. Budget – How much time, money, people, and other resources will this solution require? This is a good time to think about inter-team dependencies that might disrupt a solution another team is building.

Getting Started

To start my adventure, I first needed to get buy-in from my key stakeholder that we needed to take 4 hours out of important people’s days to canvas. We had talked about this opportunity before and were realizing how large this could be, but I wasn’t sure he was convinced that a meeting of this caliber was necessary. Also, we had not done anything like this before so I was trying something new. I sent him an email highlighting how large this could get and the differing opinions I had already heard. All evidence leading me to believe getting together to hash it out would be a great place to start.

Turns out, he thought this was a great idea so all I had to do now was get comfortable with a technique I had never used before! Not only did I have to make sure the discussion was productive, I also had to get consensus on how we would start our work. On top of that it was my first impression with some of these people so I wanted to look professional. Like I knew what I was doing.

Over the next two posts I’ll go over what I did to prepare for the meeting, how it went, and lessons I learned for next time that hopefully can help you with your first Opportunity Canvas.